W. Booth School of Engineering Practice and Technology

Engineering Technology Building (ETB), Room 509, ext. 26401

https://www.eng.mcmaster.ca/sept

DIRECTOR, W. BOOTH SCHOOL OF ENGINEERING PRACTICE AND TECHNOLOGY

B. Baetz/B.A.Sc., M.A.Sc. (Toronto), Ph.D., (Duke), P.Eng.

ASSOCIATE DIRECTOR, UNDERGRADUATE BACHELOR OF TECHNOLOGY DEGREE PROGRAM

K. Apostolou/Dipl.Eng. (Thessaloniki), Ph.D. (Minnesota) 

Four-Year Degree Programs

PROGRAM CHAIR, AUTOMATION ENGINEERING TECHNOLOGY

T. Wanyama/B.Eng. (Makerere), M.Eng (New South Wales), PhD (Calgary), P.Eng.

PROGRAM CHAIR, AUTOMOTIVE AND VEHICLE ENGINEERING TECHNOLOGY

M. Mehrtash/B.Sc. (Sharif), M.Sc. (Sharif), Ph.D. (Waterloo) 

PROGRAM CHAIR, BIOTECHNOLOGY

F. Geng/M.Sc.(Fudan), M.D. (Jining), Ph.D. (McMaster)

CHAIR, MANAGEMENT

M. Justason/B.Eng.Mgmt., M.Eng. (McMaster), MBA (Western), P.Eng.

Degree Completion Programs

PROGRAM CHAIR, CIVIL ENGINEERING INFRASTRUCTURE TECHNOLOGY

M. Justason/B.Eng.Mgmt., M.Eng. (McMaster), MBA (Western), P.Eng.

PROGRAM CHAIR, MANUFACTURING ENGINEERING TECHNOLOGY

E. Ng/B.Eng. (Hons.), Ph.D. (Birmingham)

PROGRAM CHAIR, POWER AND ENERGY ENGINEERING TECHNOLOGY

C. Tang/B.A.Sc. (Waterloo), M.Eng. (Toronto), Ph.D. (McMaster), P.Eng., SMIEEE

PROGRAM CHAIR, SOFTWARE ENGINEERING TECHNOLOGY

S. Srinivasan/B.Eng. (Bombay), M.Sc., Ph.D. (Michigan), P.Eng.

CHAIR, MANAGEMENT

M. Justason/B.Eng.Mgmt., M.Eng. (McMaster), MBA (Western), P.Eng.

BUSINESS MANAGER

M. Vaz/B.A.

TEAM LEAD, ACADEMIC PROGRAMS

J. Morrison/B.Sc., M.Sc.

ADMINISTRATIVE ASSISTANT

D. Shetty

The Bachelor of Technology (B.Tech.) programs, within the Faculty of Engineering’s W. Booth School of Engineering Practice and Technology, provide a degree-level technological education that is distinct from that offered in Bachelor of Engineering programs. These programs are more oriented to applications in specific technologies, with less emphasis on broader mathematical and scientific foundations than a corresponding engineering program. Graduates will have considerably more breadth and depth in their area of technology than graduates of college technology diploma programs. For degree completion programs, a second objective is to provide a path for college diploma graduates to gain an education leading to a university degree. The programs are being offered in two specific configurations:

• Four-year programs with direct entry from secondary school leading to a Bachelor of Technology Degree from McMaster and both an Advanced Diploma in Technology and a Business Management Certificate from Mohawk College.  The Four-Year Degree Programs are:  
  • Automation Systems Engineering Technology Co-op
  • Automotive and Vehicle Engineering Technology Co-op
  • Biotechnology Co-op
• Degree-completion programs for graduates of an Advanced Diploma in a Technology program leading to a Bachelor of Technology degree from McMaster and a Business Management Certificate from Mohawk College. The Degree Completion Programs are:
  • Civil Engineering Infrastructure Technology Co-op
  • Manufacturing Engineering Technology Co-op
  • Power and Energy Engineering Technology Co-op
  • Software Engineering Technology Co-op 

Breadth of Learning

B.Tech. graduates will be functioning in an evolving world in which they will play an important role as “evolvers” or change agents. This means that their education cannot just be narrowly focused on technical and management topics but must also enable them to develop important complementary skills, including written and oral communication skills, as well as understanding the relationship between technology and society. The Four-year B.Tech. program has three courses which are designed to develop those unique skills and broaden understanding of the complexities of technological-societal interrelationships.

Management Studies

The Degree Completion Program includes a seven-course management studies component, and the Four-Year program has a thirteen-course management studies component with courses such as: financial systems, entrepreneurial thinking & innovation, project management and strategic management. This convergence of engineering technology and management education enables graduates to ‘hit the ground running’ and make significant contributions within the ever-changing business and technical environments.

Co-operative Education

The successful completion of Co-op work terms is a mandatory component of all B.Tech. degree programs; co-op work terms provide explicit experiential learning which is related to the technologically-oriented careers for which students are being prepared. Testing and enhancing their skills through a co-operative education experience is important in enabling graduates to function effectively in an industrial environment. All Co-op work terms must be completed prior to the start of the final academic term. The co-op component is managed by Engineering Co-op and Career Services.

Four-Year B.Tech. Programs

Academic Regulations for Four-Year B.Tech. Programs

Students enrolled in a Four-Year program for the B.Tech. degree, in addition to meeting the General Academic Regulations  of the University, shall be subject to the following regulations. 

Minimum Requirements to Continue in a Program Beyond Level I

In Level II and above, the student must maintain a Grade Point Average (GPA) of at least 3.5 to continue in the B.Tech. program.

Sequence of Courses

Courses must be taken in the sequence specified in the requirements for the program as outlined in this Calendar. Students must register for all outstanding work of one level before attempting work for a higher level.

Repeated Courses

All failed courses must be repeated if they are required courses for the B.Tech. program or may be replaced if the courses are not explicitly required.

Level of Registration

A student is required to register in the lowest level for which more than six units of work are incomplete. Work of a higher level may be undertaken only with the permission of the B.Tech. Academic Advisor, Office of the Associate Dean (Academic).

Minimum Work Load

The minimum workload for students registered in Level I of the Bachelor of Technology program is 30 units. The workload for students registered above Level I will range from 30 to 36 units per year and is specified within each academic program.

Reinstatement

A student who is ineligible to continue in a Bachelor of Technology program (May not continue at university) may normally not apply for reinstatement for one full academic year. Exceptions may be made where there are extenuating circumstances that are supported by documentation.

Students seeking reinstatement must complete the Reinstatement Request Form available at the Office of the Registrar. The completed form and the fee must be submitted to the Office of the Registrar by June 30. The form must be accompanied by a written explanation of the reason for the student’s previous unsatisfactory academic performance, reasons for reinstatement at this time (including documentation of what has been done to correct previous academic problems), reasons why the student would expect to succeed in the desired program if reinstated (i.e. what was the previous problem and what has been done to correct it), activities since last registered at McMaster including all academic work. Letters of reference may be submitted but are not required. Reinstatement is not guaranteed.

A student who is reinstated after being ineligible to continue at a given level must repeat all courses of that level, unless specific course exemptions are granted explicitly in the letter of reinstatement. Students who are reinstated will be placed on program probation, and calculation of their Grade Point Average will begin anew. If at any review after reinstatement the student’s Grade Point Average falls below 3.5, the student will be required to withdraw from the University for a period of at least 12 months.

Transfers

Students in good standing in Engineering I or students in other Faculties can apply to transfer directly to Level I B.Tech. Programs (Automation Engineering Technology I, Automotive and Vehicle Engineering Technology I, Biotechnology I) provided they have completed the necessary admission requirements. Transfer credit will be given for courses completed with a minimum grade of C- that are equivalent to courses in the B.Tech. program. Students who anticipate making such a transfer should consult with a B.Tech. Academic Advisor in the Office of the Associate Dean of Engineering (Academic) at the earliest possible opportunity to discuss process and the assessment of transfer credit. Applications for transfer must be submitted to the Office of the Associate Dean of Engineering (Academic) no later than June 15.

Requirements for Advanced Mohawk Diploma

Students registered in the Four-Year Bachelor of Technology Program may elect to leave the Program upon the successful completion of Level III and 8 months of co-op. Students will be awarded a Mohawk College Advanced Diploma.

Structure of the Four-Year B.Tech Program

*Co-op work-term possibilities for the summers in Years 1 and 4 should be discussed with Engineering Co-Op and Career Services.

Degree Completion B.Tech. Programs

Academic Regulations for Degree Completion B.Tech. Programs

Students enrolled in a degree-completion program for the B.Tech. degree, in addition to meeting the General Academic Regulations of the University, shall be subject to the following regulations.

Minimum Requirements to Continue in a Program Beyond Level II 

Students in Level III and above in the Civil Engineering Infrastructure Technology Program, in the Power & Energy Engineering Technology Program, in the Manufacturing Engineering Technology Program, and those in the Software Engineering Technology Program that started before Fall 2022 must maintain a Grade Point Average (GPA) of at least 3.5 to continue in the program.  

Advanced Standing

The Bachelor of Technology degree is a 4-year degree program. A minimum of 72 units of work must be completed at McMaster University in order to obtain a Bachelor of Technology degree.

Sequence of Courses

Students in the degree completion program may register in any courses in the program for which they have achieved the specified prerequisite requirements.

Repeated Courses

All failed courses must be repeated if they are required courses for the B.Tech. program or may be replaced if the courses are not explicitly required.

Level of Registration

A student is required to register in the lowest level for which more than six units of work is incomplete.

Work Load

Courses in the degree completion program are only offered on evenings (Monday through Friday), on Saturdays and Sundays and as exception to the academic general regulations. Students may elect to register in the program full-time or part-time. Students in these programs are considered to be full-time if registered for 9 units or more in an academic term. Students working full-time should not attempt more than two or three courses per academic term.

Reinstatement

A student who is ineligible to continue in a Bachelor of Technology program (May not continue at university) may normally not apply for reinstatement for one full academic year. Exceptions may be made where there are extenuating circumstances that are supported by documentation.

Students seeking reinstatement must complete the Reinstatement Request Form available at the Office of the Registrar. The completed form and the fee must be submitted to the Office of the Registrar by June 30. The form must be accompanied by a written explanation of the reason for the student’s previous unsatisfactory academic performance, reasons for reinstatement at this time (including documentation of what has been done to correct previous academic problems), reasons why the student would expect to succeed in the desired program if reinstated (i.e. what was the previous problem and what has been done to correct it), activities since last registered at McMaster including all academic work. Letters of reference may be submitted but are not required. Reinstatement is not guaranteed.

A student who is reinstated after being ineligible to continue at a given level must repeat all courses of that level, unless specific course exemptions are granted explicitly in the letter of reinstatement. Students who are reinstated will be placed on program probation, and calculation of their Grade Point Average will begin anew. If at any review after reinstatement the student’s Grade Point Average falls below 3.5, the student will be required to withdraw from the University for a period of at least 12 months.

Admission to Degree Completion Programs

The minimum academic requirement for admission to the Bachelor of Technology degree completion programs in Power and Energy Engineering Technology, Manufacturing Engineering Technology, and Software Engineering Technology is successful completion of an advanced technology diploma from an Ontario college with a Grade Point Average of 75%.

The minimum academic requirement for admission to the Bachelor of Technology degree completion programs in Civil Engineering Infrastructure Technology is successful completion of an advanced technology diploma from an Ontario college with a Grade Point Average of 80%.

The degree completion programs will accept students with diplomas in a related technology program. Applicants with educational background equivalent to those completing Ontario college diplomas (i.e. overseas technology diploma or degree graduates) are encouraged to apply; such applications will be considered on an individual basis. All applicants to the B.Tech. Degree Completion program are required to complete and submit an on-line supplementary form (in lieu of a resume) as part of the application/admission process: https://www.eng.mcmaster.ca/sites/default/files/uploads/booth/real_supplementary_form.pdf

Note

Co-op Education: Students in the degree completion Bachelor of Technology programs are required to complete eight months of co-op experience prior to the start of their final academic term. The eight months of co-op experience may be acquired through a combination of two four-month experience terms. These co-op work terms will be waived for diploma graduates whose programs are operated on a co-op basis and for diploma graduates who have achieved significant work experience in a related field through the completion of a Prior Learning Assessment conducted by the Engineering Co-op & Career Services Office.

As well as completing the academic requirements as specified in this Calendar, students in co-op must also complete the following courses prior to graduation:

• ENGTECH 1ET0 - Introduction to the Technology Co-op Program
    
• ENGTECH 2ET0 - Four Month Co-op Experience I
    
• ENGTECH 3ET0 - Four Month Co-op Experience II
    

ENGTECH 1ET0  must be completed at least one academic term prior to the term in which the first co-op placement is taken.

Programs

• Automation Systems Engineering Technology Co-op (B.Tech.)
• Automotive and Vehicle Engineering Technology Co-op (B.Tech.)
• Biotechnology Co-op (B.Tech.)
• Civil Engineering Infrastructure Technology Co-op (B.Tech.)
• Manufacturing Engineering Technology Co-op (B.Tech.)
• Power and Energy Engineering Technology Co-op (B.Tech.)
• Software Engineering Technology Co-op (B.Tech.)